Stop buttons intermittently working, sometimes 1, sometimes 2
I decided to make a new thread because I somewhat fixed the previous issue with the reels not stopping as far as none of them would work. I removed the dead C10 capacitor and replaced the fuse (getting new capacitors today).
The issue now is the Stop buttons are intermittently working. So far button 1 (left) has not worked at all to stop the first reel. Button 2 appears to work consistently every time. Button 3 sometimes works and sometimes doesn't. When I watch the diagnostic lights I can see that when pressing 1 it's not registering, and when 3 DOES work it DOES register on the diagnostic board, but when it doesn't work it doesn't register. Button 2 appears registers when pressed.
I swapped the wires between them to see if it was the buttons themselves. 1 and 3 will both work perfectly fine if they are plugged into the 2nd plug. This rules out the buttons as the issue.
My buttons do not have optical sensors like some other machines, but rather they are just push buttons with two wires rubbing straight to the board. I don't know if it's an issue with the C10 capacitor not being there, but I highly doubt it because a broken connection would always be broken, not intermittent. It seems like a logic issue of some sort. PXL_20250212_035104160.MP.jpgPXL_20250208_002413602.jpg
Reply With Quote
Originally Posted by bjab
#UKPachinko
