Autostop for Olympia Las Vegas

[cypher]

Hi all, just got my first machine, an Olympia Las Vegas, and want to install a universal autostop. However, I don't know where to plug it in as I expected the board to be to the right of the reels, but there is nothing there.

I've attached a photo of the boards above and to the left of the reels, does anyone know which is 30 pin connector I'm supposed to use? Thanks!

IMG_0276.jpg

[Drunkenclam]

Well I can read from the Hiragana it is a las Vegas machine so should have the bunny on the front with the roulette wheel at the top.

Not sure about autostop. I would see where the reels and stop buttons get connected to. Seeing as its the stop buttons you are overiding.

Of course any instructions on said auto stop kit?

[cypher]

Yes, it's the machine with the roulette wheel. I'm looking at the universal autostop kit (not sure if I can post the ebay link here). But here's a picture of the install from the ad, but it's referencing a board to the right of the reels, which my machine doesn't have.

install.jpg

[cypher]

Also, wanted to say thank you for your help!

[Drunkenclam]

Do you have any boards with an empty 6/7 pin socket?
Shown top right in the ad picture?

[MrGneiss]

Yes, it's the machine with the roulette wheel. I'm looking at the universal autostop kit (not sure if I can post the ebay link here). But here's a picture of the install from the ad, but it's referencing a board to the right of the reels, which my machine doesn't have.

install.jpg

It's ok to post ebay links!!

[takethecastle57]

and biscuits

[cypher]

I couldn't find any open sockets like that one in the photo.