Noob error

[keluar]

I just got a CR pachinko machine imported from Japan to UK.
I think I may have fried it by plugging 24v pachinko into 240-110V stepdown transformer.
Is it still salvageable?
Any recommendation for the proper psu that can be bought in UK?

The transformer has no light but the inner fuse of stepdown transformer seems intact
Thanks in Advance

[Drunkenclam]

Not good. What make/model is it. There is a fuse protection and protection diode. If the fuse has blown, replaced and blows again. the diode is shoot. Can be cut out and/or replaced.
Note. If its removed. There is no more protection. Do it again and its bye bye machine.

[keluar]

Not good. What make/model is it. There is a fuse protection and protection diode. If the fuse has blown, replaced and blows again. the diode is shoot. Can be cut out and/or replaced.
Note. If its removed. There is no more protection. Do it again and its bye bye machine.

Thanks. For some reason, my step down 220-110v fuse (plug to the mains) is blown (rated 3A), the output fuse (output 110v) of the step down is intact and the 20A fuse in the pachinko machine appears intact as well.
I bought the manchine from japan but it seems not to have included the 24v transformer. Is there anywhere I can obtain from the UK?
The model is Captain Tsubasa Wakabayashi Amaen na yo! by sensei R&D
by R&D sensei