Kitac GoGo Juggler Power Supply Replacement
Hello All,
My Kitac GoGo Juggler power supply gave out some time ago... Switching on the big green rocker button results in just a quick flash of the main board LEDs followed by a slight "click" sound in the power supply and then nothing further.
I found a replacement (though different) Juggler power supply on eBay recently assuming I'd rather adapt a working unit then try to fix the old supply, but the new one has a different format circuit board and the jacks don't mate with the larger plugs on my machine.
I've already converted the AC input jack (only two wires... not so hard to figure out!), and swapped the key switches (the new supply didn't come with a key) but the 2 plugs coming down from the main board aren't as simple to adapt to. The next step was to desolder the connector from top end of the original's main board and now, if I can figure out which pins on the new supply relate to which pins on the old, I'll hook 'em all up and light the ol' Juggler up again. If anyone knows anything which may be helpful in this regard... please write!
My original Kitac supply is an 03-086A and the replacement supply is an 03--613. I'll post some photos next.
Regards,
Robert
Reply With Quote
Originally Posted by jimcv62
and biscuits
