Volume Help

[Burridge]

About a decade ago or more one of our members put a Toggle switch that with one wire from each speaker you turn off the "Warning" noise makers for that 20 seconds or more then you switch the speakers back on after .

That would be perfect for me, if I end up feeling particularly ballsy one day I might have a go at taking it apart some more to find the speaker wires, but after looking and looking at the thing, there's literally nothing obvious in terms of "oh if I remove these screws, this will come off", and with there being no info on the frame whatsoever that I can find, I'm on my own in figuring it out lol.

[takethecastle57]

On the back the speaker plugs are Two wired ones on the rectangular board in back you will have the machine plugged in and the machine turned off then turn on (during the day ) and disconnect one two wire plug on the big board One at a Time

Until you find which plug has the Screaming speaker or speakers then splice the toggle switch on one of it wires so when you turn it on you just flip the switch to stop the screaming .

Then after the Screaming Start up time is done just flip the switch again to turn the speaker on