Cranky Condor - Reset switch

[woodzy]

I just obtained this machine. I do not have keys for the reset inside on the power supply. I ordered a replacement switch but I can't seem to figure out how to remove the back screw from the power supply (see 4th picture) that goes into the back of the cabinet. I also have read that the switch in the door (first picture) might be used as a reset which I have a key that I can turn that switch (center of the large door). That center switch has wires that go into the wire bundles. Maybe I don't need to install the switch if this front switch - it will turn both left and right and the key will only come out in the center position. I wish I had a manual that explained the operations of this machine.

Thanks in advance for any help you can give me.
I have attached pictures for clarifications. IMG_0930.jpgIMG_0931.jpgIMG_0932.jpgIMG_0934.jpg

[MrGneiss]

WELCOME!!!

Sorry I can't help with the screw..

The door key can usually be turned in one direction to open the machine and in the other direction to do a minor reset.. But it can't be used for a full reset or changing the odds like the key switch inside..

[takethecastle57]

and biscuits

You have Two front panel circle locks !! Very Cool !! You got one on the Upper Right and one in the regular location .

Yeah you have to remove that huge circuit board on the power supply and a whole bunch of screws and bolts to remove before the power supply can be removed .

Best of Fun working on it !!